VLPO=0, BGEN=0, ACKISO=0, REGONS=0, BGBE=0
Regulator Status And Control register
BGBE | Bandgap Buffer Enable 0 (0): Bandgap buffer not enabled 1 (1): Bandgap buffer enabled |
REGONS | Regulator In Run Regulation Status 0 (0): Regulator is in stop regulation or in transition to/from it 1 (1): Regulator is in run regulation |
ACKISO | Acknowledge Isolation 0 (0): Peripherals and I/O pads are in normal run state. 1 (1): Certain peripherals and I/O pads are in an isolated and latched state. |
BGEN | Bandgap Enable In VLPx Operation 0 (0): Bandgap voltage reference is disabled in VLPx , LLS , and VLLSx modes. 1 (1): Bandgap voltage reference is enabled in VLPx , LLS , and VLLSx modes. |
VLPO | VLPx Option 0 (0): Operating frequencies and SCG clocking modes are restricted during VLPx modes as listed in the Power Management chapter. 1 (1): If BGEN is also set, operating frequencies and SCG clocking modes are unrestricted during VLPx modes. Note that flash access frequency is still restricted however. |